Maxx CNC Aluminum Hopup Chamber M4A - PRO

Maxx

CNC Aluminum Hopup Chamber M4A Pro (with BB Latching System) unit is precisely machined to perform accurately and consistently on Tokyo Marui (include G&GKRYTAC, except KWA) Standard M4/M16 AEG series.

The Hopup Chamber M4A unit is built with an aluminum Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot.
The Hopup Chamber M4A unit is designed to accept 21.00mm to 21.25mm nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use.
The Hopup Chamber M4A unit is wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore AEG Gearbox/HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are optional)
Also mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting.
More than that, the Hopup Chamber M4A Pro unit is specially designed with a new BB Latching System to prevent BB dropping after removing the magazine. The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber.

***The Dual UV LED Tracer Module is an add-on option to glow BB in the dark. Operating Voltage from 7VDC – 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over the stock setup. Please check your FPS!

Includes
product_right_arrow.png 1 x CNC Aluminum Hopup Chamber M4A Pro (with BB Latching System) unit
product_right_arrow.png 2 x CNC Acrylic Side Cover
product_right_arrow.png 2 x CNC Brass 2.5mm Side Wing
product_right_arrow.png 1 x CNC Steel Pivot Pin
product_right_arrow.png 1 x CNC Aluminum Hopup Lever
product_right_arrow.png 1 x CNC Aluminum Soft Round Nub
product_right_arrow.png 1 x CNC Aluminum Soft Flat Nub (4mm)
product_right_arrow.png 1 x CNC Aluminum Hard Concave Nub (4mm)
product_right_arrow.png 3 x Steel Nub Spring
product_right_arrow.png 1 x CNC Steel Spring Guide
product_right_arrow.png 1 x Steel Upper Compression Spring
product_right_arrow.png 1 x Steel Center Compression Spring
product_right_arrow.png 1 x CNC Delrin Locking C-Clip
product_right_arrow.png 1 x CNC Brass Barrel Spacer
product_right_arrow.png 1 x Brass Barrel Spacer Holder Oring
product_right_arrow.png 1 x CNC Aluminum Rotary Dial Knob
product_right_arrow.png 1 x CNC Aluminum Inlet Adaptor (OD11mm)
product_right_arrow.png 1 x CNC Brass Inlet Spacer

 

Specification
product_right_arrow.png Overall Length: 51.65mm
product_right_arrow.png Overall Height: 37.75mm
product_right_arrow.png Inlet Adaptor Outer Diameter (to fit into Gear Box): 11mm
product_right_arrow.png Hub Outer Diameter (to fit into Outer Barrel): 12mm
product_right_arrow.png Hub Inner Diameter (to fit Nozzle): 8mm
product_right_arrow.png Feeder Outer Diameter (to fit magazine): 8.85mm
product_right_arrow.png Feeder Length (to fit magazine): 6mm
product_right_arrow.png Material: Aluminum 6061

 

Features
product_right_arrow.png Machined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durability
product_right_arrow.png Performed accurately and consistently on Tokyo Marui (include G&G, KRYTAC, except KWA) Standard M4/M16 AEG series
product_right_arrow.png Precision Rotary Dial Knob for fine hopup adjustments
product_right_arrow.png Re-engineered the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot
product_right_arrow.png Removable Steel Pivot Pin for ease of setup and maintenance
product_right_arrow.png Accepted 21.00mm to 21.25mm nozzle length
product_right_arrow.png Fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use
product_right_arrow.png Wisely equipped with an interchangeable Inlet Adaptor OD11mm to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore AEG Gearbox/HPA Engine nozzle outlet without wobbling. (Inlet Adaptor OD11.5mm and OD12mm are sold separately)
product_right_arrow.png Mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots
product_right_arrow.png Included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting
product_right_arrow.png Equipped with 2 compression springs on top and center to ensure the hopup unit is seated straight and air tight during use
product_right_arrow.png Specially designed with a new BB Latching System to prevent BB dropping after removing the magazine
product_right_arrow.png The Latching Arm can also be manually pressed to release the remaining BB from inside the hopup chamber
product_right_arrow.png Compatible with any 11mm inner bore AEG Gearbox/HPA Engine nozzle outlets
product_right_arrow.png The Dual UV LED Tracer Module to glow BB in the dark ready!

95,00

1 op voorraad